-- gameplaySP2X Gameboy Advance emulator for GP2X --
gpSP2X is a version of my (Exophase)'s emulator originally for Sony PSP.
A large amount of effort has been done to make it more optimized for the
ARM CPU present in the GP2X, however it is still very much a work in
progress.
See readme.txt for the PSP version readme, which contains a lot of
information relevant to the GP2X version (note that some of it does
not apply however).
Changelog:
0.9-2xb u6
- Fixed clock and scaling config saving.
- Fixed occasional crash on first ROM load on 1.1 firmware.
- Added LCD timing setup code, which can be controlled through
'pollux_dpc_set' environment vatiable (see gpsp.gpe wrapper script).
0.9-2xb u5
- Added portrait drawing modes. They eliminate tearing but are slightly
slower.
- Added page scrolling in ROM browser with L/R.
- 32MB ROM support fixed.
0.9-2xb u4 (unofficial notaz release, done on Exophase's request)
- Wiz port. No emulation related changes.
- Wiz: dropped SDL for video and hitting hardware directly (GPH SDL can't
be trusted, it doesn't do double buffering as of firmware 1.0).
- Added new optimized software scaler with interpolation.
- gpSP is now saving ROM dir on exit. Delete romdir.txt if you don't
want that.
- gpSP now comes with wARM, new kernel module+lib for ARM cache control
(replaces mmuhack).
- gpSP no longer invalidates whole icache after recompilation, might
cause minor speedup.
0.9-2xb u3 (unofficial notaz release, released with permission):
- Removed built-in CPU/LCD/RAM-Tweaker.
- Improved usability of volume control.
- Removed PSP-specific GUI options, adjusted help text.
- Overclocking from menu now works, keep it at 200 if you don't want that
(if you want to overclock using launcher, for example).
- Fixed centering-on-first-run problem.
- 3:2 scaled option now does what it says.
0.9-2xb u2 (unofficial notaz release):
- Replaced non-working mmuhack.o with proper one, added cache flush calls
to avoid artifacts.
0.9-2xb u1 (unofficial notaz release):
- Fixed a problen in thread synchronization which caused deadlock after
some time.
0.9-2xb:
-- IMPORTANT-- If you're overwriting an old version, be sure to delete the
gpsp.cfg file first, or be prepared to have a bunch of weird button
settings that would require fixing.
- Fixed some bugs stunting compatability.
- Optimized alpha blends in renderer.
- Some more optimizations to dynarec output.
- Savestates should work better now.
- Cheat/misc menu won't crash the emulator.
- Main button config window works (not all buttons are in yet)
0.9-2Xa: (Exophase release)
- Redid autoframeskip. Should work more reliably.
- Rewrote dynamic recompiler from x86 source (arm_emit.h, arm_stub.S).
Has some more sophisticated behavior than the last version, more is
still to come... Should notice a slight speed improvement over the
last version.
- Tweaked GUI to be a little more useable. Buttons are now mirroring the
PSP version's.
- Code unification + cleanup amongst versions.
v9008: (zodttd release)
- Updated the way autoframeskip works. Should be better now. Still has a max
frameskip value.
- Added a slight performance increase to the dynarec.
- Added sync() to make sure files such as savestates and in-game saves are
saved properly to the GP2X.
v9006: (zodttd release)
- Initial public release
Installation:
1. Place the "gpsp.gpe" and "game_config.txt" file in a directory on your SD
card used with the GP2X.
2. Place your GBA BIOS in the directory from step 1. This file must be named
"gba_bios.bin" in all lowercase as shown, so rename it if needed.
-- NOTE --
There are two commonly available BIOSes - one is the correct one used in
production GBA's worldwide and the other is a prototype BIOS. The latter
will not cause some games to not work correctly or crash. If you attempt
to use this BIOS you will be presented with a warning before being
allowed to continue. This screen will give you a checksum of the real
BIOS image (see readme.txt for further information).
3. Place your GBA games in the directory from step 1. These files should have
a ".gba" or ".bin" file extension. Zip compressed games should be supported
and are recognized with the ".zip" file extension. Note that 32MB ROMs will
probably not run if zipped. 16MB and smaller should be OK.
4. Done. Run gpsp.gpe.
Controls:
How to use gpSP on the GP2X:
Buttons are mapped as follows (GBA/ingame buttons can be changed in the menu):
GP2X--------------------GBA
X -> A
B -> B
L TRIG -> L TRIG
R TRIG -> R TRIG
START -> START
SELECT -> SELECT
GP2X--------------------------------gpSP
-- IN-GAME --
VOL MIDDLE (UP + DOWN) -> menu
PUSH STICK -> fps display toggle (second number is
frames actually drawn)
-- IN-MENU --
B -> select option
X -> cancel/exit menu
A -> escape (up one director level in the
file selector)
When gpSP is started, you are presented with the option to overclock your
GP2X. Use the L/R TRIG to change the CPU clockspeed and press START to
continue. You may also change RAM timings here - experiment with what
works well. Note that going too high on overclocking or low on RAM
timings can cause the game to crash or the GP2X to outright freeze up.
If you do not want to overclock, press START without using L/R.
You will now be presented with a menu to choose a game. Press the IN-MENU
"SELECT" button shown above to pick a game to load.
If you would like to test gpSP for the GP2X with a homebrew (free public
domain) game, a game by Russ Prince works very well with gpSP. It is called
Bust-A-Move and is a remake of the classic game it's named after.
How to build from source:
The makefile included in the source is geared towards the Open2x toolchain.
If you use Open2x and installed it in the way recommended then it should
work okay, assuming you also have up to date HW-SDL (and have
arm-linux-sdl-config installed in the right place). The makefile is in the
gp2x directory, so go there first then just type make to build gpsp.gpe.
Might need a little tweaking if your setup is different. If you need help
you can ask me, but I'll probably nag you about why you want to build it in
the first place.
GP2X version FAQ:
Q) Help! This game doesn't work. Am I using a bad version of the ROM?
A) First, make sure you're using the correct BIOS version. If you aren't
gpSP should tell you. Other than that, there are some games that are
known to not work now (and will probably work later), and perhaps
many more games that I don't know about that don't work. I haven't
launched a full scale compatability test at this version, so it might
take a while before the compatability levels are high.
Q) Why is this version slower than the PSP version?
A) gpSP is still a work in progress. It might be possible to obtain more
speed from both this version and the PSP one too (and others in the
future). With that in mind, know that even a very agressively overclocked
GP2X is still less powerful than a PSP, generally speaking. Still, I
have a lot of ideas. It's unlikely that the GP2X version will ever be as
fast/faster than the PSP version for anyone but anything's possible.
Q) How high does my GP2X have to overclock to enjoy gpSP?
A) That depends on you. Higher overclocking will mean less frames skipped
on autoframeskip, or less frameskip needed if on manual. Or it can
make the difference between whether or not virtual 60fps can be reached.
For some games no GP2X in the world will be able to run them fullspeed,
with any amount of frameskip. A few might run well with no overclocking
and a generous level of frameskip (probably manual). If you don't care
about battery life (or you're plugged into an outlet) you should push
it as high as you can while still maintaining stability, because
chances are high that whatever you play will benefit from it. Right now
you'll probably want 260MHz if you can achieve it, but with a lot of
luck this number will lower slightly in the future (and is just a vague
ballpark figure anyway). I don't want to scare anyone off from using the
emulator, you should give it a try and see how it plays for you
regardless of how high you can overclock. Just note that this is far
from a locked smooth experience for everyone on every game.
Q) GBA has an ARM processor, GP2X has an ARM processor. GP2X is more
powerful than GBA. This emulator should run great without overclocking,
so therefore you're doing it wrong.
A) That's not a question, but I'll field it anyway. Two things: first,
"virtualization", or running the GBA code "natively" on the GP2X is
probably not possible, at least not with the way I want to do things.
For reasons why go read my blog (see below). So yes, you actually
do need more than 16.7MHz of ARM9 power to emulate the GBA's CPU.
Second: there is a whole lot of work behind emulating the pretty 2D
graphics on the GBA, something it can do in hardware a lot better than
this platform can.
End result: GBA emulation on GP2X isn't as easy as you think it is.
Q) What are you working on now? When will you release the next version?
A) See the gpSP development blog:
http://gpsp-dev.blogspot.com/
Note that I don't give release dates, ever, unless I'm right on the verge
of releasing. Be grateful that I've decided to be much more open about
the development of the emulator now.
Q) Thanks to your blog I heard that you made some improvement. Can I have
a copy of the new code?
A) No. Builds in transition often have a lot of problems, and I like for
releases to be relatively substantial. I can probably be bribed out of
them with donations though. :P
Q) Why do the menu suck so much? Why do half the options not work or not
make any sense?
A) Sorry, the menu still hasn't been modified very much to fit the GP2X
version instead of the PSP version.. hopefully this will improve in the
future.
Q) Who's in charge of the GP2X version anyway?
A) Originally, zodttd was. I, Exophase, have basically usurped control of it
now to encourage zodttd to work more on his PS1 emulator (that and I'm
possessive of gpSP and get nervous when people work on it too heavily).
zodttd will most likely still be around to work on things though.
Q) I'm a super nice person and would like to donate some of my hard earned
money to this one-off GBA emulator. Where do I send my money to?
A) Exophase: exophase@gmail.com on PayPal
zodttd: https://www.paypal.com/cgi-bin/webscr?cmd=_xclick&business=heirloomer
%40pobox%2ecom&item_number=1&no_shipping=1&no_note=1&tax=0&cy_code=USD&bn=
PP%2dDonationsBF&charset=UTF%2d8
^ Click there for donating on PayPal (remove whitespace/linebreaks).
GP2X people have already donated a lot more to me than PSP people have,
even though there's an order of magnitude or two less users. And they've
donated far more to zodttd than they have to me. So I'm not going to ask
people to donate..
However I won't lie: donating ups the chances of me actually working on the
next version (for which I have a lot of ideas, but not necessarily time to
dedicate to.. that time might need more incentive to be allotted from other
things). This could change depending on my employment situation, but right
now I feel guilty doing anything that doesn't help guarantee that I'll be
able to buy food a year from now.
Q) Tell me all of your personal information.
A) Again not a question, but why not. I'm Exophase, real name: Gilead Kutnick,
male, 23 years old, current residence Bloomington, IN; straight/single/not
actively looking, almost have an MS in Computer Science (do have a BS
underneath it), likes PSP more than GP2X, will not write a Nintendo DS
emulator for either, am currently looking for a job for after I graduate.
Q) You said you're looking for a job.
A) Yes. If you have one or know someone who needs a low level oriented
programmer then I'm up for grabs. And this is my resume:
http://exophase.devzero.co.uk/resume.pdf
Credits:
Original codebase: Exophase (exophase@gmail.com)
Foundation gp2x code: zodttd
GP2X dynarec/stubs + current code maintainance: Exophase
어설프게 구글 돌리지는 말고요 ㅋ
이렇게 많은것들을 해석하는 사람이라면
시간이 잉여롭게 넘쳐나겠지?
메탈페이블 소싯적모습